Bobrick B-165 2430 Mirror with Stainless Steel Channel Frame 24X 30?
Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction,
provide backing to comply with local building codes, then secure wall hanger with screws (not furnished) . When providing
a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall
surfaces, provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or
expansion bolts. Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members.
Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this,
mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above
final position and then lowered into final position.
Snap Locking Design - Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final
position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom
or under the bottom of the mirror and pulling mirror bottom forward and then up.
Screw Locking Design - Lock mirror to wall hanger by tightening Phillips-head locking screws that are concealed in the
bottom of frame at points indicated by a T. Mirror may be unlocked from wall hanger by loosening locking screws and lifting
mirror off of concealed wall hanger.
Frame - Type-430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel with 1/4" (6mm) return at rear with bright
polished finish. One piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging brackets
near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the
wall. Locking devices secure mirror to concealed wall hanger. In Screw Locking Design (see figure 2), concealed Philips-head
locking screws securely fasten mirror to wall hanger.
Mirror - No. 1 quality, 1/4" (6mm) select float glass: selected for silvering, electrolytically copper-plated by the galvanic
process, and guaranteed for 15 years against silver spoilage. Corners are protected by friction-absorbing filler strips; back is
protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.
Concealed Wall Hanger - 20-gauge (0.9mm) galvanized steel. Incorporates lower support member, forming rigid rectangle,
which engages lower backplate louvers to keep bottom of mirror against wall.
Model: Bobrick B165 2430
Mirror shall have a one-piece type-430 stainless steel channel frame, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm), with 90? mitered corners; all exposed surfaces shall have bright polished finish. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. Corners shall be protected by friction-absorbing filler strips and the back shall be protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding. Galvanized steel back shall have integral horizontal hanging brackets located at top and bottom for mounting on concealed rectangular wall hanger to prevent the mirror from pulling away from the wall. Locking devices secure mirror to concealed wall hanger. Mirror shall be removable from the wall. Framed Mirror shall be Model B-165 _______________ (insert width and height) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.