Sargent 5110-EN Alarmed Exit Lock - Exit Only - Aluminum
Materials Paddle, cover and chassis are nonferrous alloys
For Doors 1-3/4" thick standard with a 4-1/2" minimum stile width. Furnished with wood and machine screws.
Hand Reversible. Exit alarms are packed right hand reverse bevel (RHRB)
Electronics Modern, solid state circuitry
Power Source Battery powered by a 9 volt alkaline-type. Quick disconnect is provided for fast, easy battery maintenance. Current draw is 130 mA
Alarm Dual frequency pulsating-type horns are provided to cover a wide range of hearing sensitivities. Horns are activated by any unauthorized latchbolt movement or the attempted removal of the cover. Authorized exit is permitted for approximately 15 seconds after activation to permit a person to pass through the door without sounding the alarm. The horns, once activated, will sound for approximately two minutes, then shut off and automatically rearm.
Memory LED Light A red LED alarm light is provided which flashes to indicate a violation has occurred. The LED will continue to flash beyond the alarm cycle to indicate where the violation has occurred. The LED light can be turned off only by inside key operation
Low Battery Alert The horn will “chirp” on an intermittent basis
Latchbolt Stainless steel. A full 3/4" bolt is monitored by an electronic sensing system
Cylinder Operation Key inside arms and disarms unit. The horn will emit a short “chirp” as the colored alarm indicator flag is switched to the ON position. The unit has a 15 second delay feature to allow for exit. Mortise cylinder 41 furnished.
UL Listed For Exit Lock
ANSI Standards 5100 conforms to A156.5. Complies with A117.1 for Accessibility Standards