Ives 571 Coat & Hat Hook

The Ives 571 is the standard all-purpose coat and hat hook from Ives Builders Hardware in a traditional hook profile. Base dimensions are 1-3/4 inches high by 1-1/4 inches wide. Projection is 3 inches from the wall. It installs on the back of a door, on a wall, or inside a cabinet with two screws through the base. Cast brass for brass and bronze finish variants. Cast aluminum for aluminum finish variants. Epoxy-coated aluminum for the Black and White finish variants. Three body materials, seventeen total finish options, ANSI/BHMA A156.16 certified.

The 571 is the smallest hook in the Ives coat hook series and the most widely specified for single-door applications: restroom doors, office back doors, changing room doors, hotel guest room doors, and anywhere a simple coat or hat hook is needed without the weight capacity or projection of a larger unit. For larger hooks with more projection or a heavier-duty profile, the Ives 572, 574, and 575 are progressively larger and more substantial within the same series. For all Ives builders hardware, browse our builders hardware catalog.

Three Body Materials

The 571 is available in three distinct base material types, which determines both the finish options available and the structural weight of the hook.

Cast brass is the premium material option. Brass variants (prefix B) are the heaviest and most durable, suited for commercial applications where finish longevity and corrosion resistance matter. Cast brass takes plated finishes cleanly and holds them longer than aluminum base.

Cast aluminum is the standard material. Aluminum variants (prefix A) are lighter than brass and available in a broader range of decorative finishes including Aged Bronze and Bright Nickel. Aluminum is appropriate for interior applications where weight isn't a daily concern.

Epoxy-coated aluminum covers the A-BLK (Black) and A-W (White) finishes. These are aluminum bodies with a baked epoxy coating that provides a uniform, non-metallic finish for applications where a black or white hook matches a painted or powder-coated door or wall surface.

All 17 Finish Variants

Aluminum series: A92 Aluminum Clear Coat, A3 Bright Brass Plated, A5 Antique Brass, A10 Satin Bronze, A14 Bright Nickel, A15 Satin Nickel, A716 Aged Bronze, A-BLK Black Epoxy Coated, A-W White Epoxy Coated.

Brass series: B3 Bright Brass (605), B4 Satin Brass (606), B5 Antique Brass (609), B10B Oil Rubbed Bronze (613), B15 Satin Nickel (619), B26 Polished Chrome (625), B26D Satin Chrome (626), B716 Aged Bronze Brass/Bronze.

Ives 571 Specifications

• SKU: 571 A92 (specify finish at order)

• Also known as: Ives 571A, 571B, 571A92, 571A BLK, 571B10B, 571B26D, ives coat hook 571, ives 571 coat hat hook

• Standard: ANSI/BHMA A156.16 L13113 (brass); L33113 (aluminum)

• Type: Coat and hat hook, traditional design

• Base: 1-3/4" H x 1-1/4" W

• Projection: 3" from wall surface

• Body materials: Cast brass (B series); Cast aluminum (A series); Epoxy-coated aluminum (A-BLK, A-W)

• Finishes: 17 options (see above)

• Installation: Two-screw base mount to door, wall, or cabinet surface

• Resources: Ives Full Catalog in Resources section

571A vs 571B: Aluminum vs Brass

The "571A" prefix identifies all aluminum body variants (571A92, 571A BLK, 571AW, 571A3, etc.). The "571B" prefix identifies all brass body variants (571B3, 571B4, 571B10B, etc.). If finish matching is the priority and the specific finish is available in both materials, the brass variant provides better long-term finish durability. If cost is the priority and the door or wall surface is interior protected from moisture, the aluminum variant delivers the same traditional hook profile at a lower cost.