Schlage LE Series

The Schlage LE Series is the wireless mortise lock that finally closes the gap between perimeter access control and everything behind it. If you searched "schlage le", "schlage le series", "schlage le mortise lock", "schlage le lock", "schlage le locks", "le locks", or "schlage le wireless mortise lock"- every product in this category is stocked and ships same day from American Locksets. 

Why the Schlage LE Series Wireless Mortise Lock Is the Right Specification

The Schlage LE Series is built on the Grade 1 L Series mechanical mortise chassis- the most specified commercial mortise lock body in North American construction- and layered with ENGAGE wireless technology. That combination gives you a lock that passes every ANSI/BHMA A156.13 and A156.25 mechanical and electronic standard in a single unit, without running wires to the door, without a separate reader, and without a control panel for each opening.

Most electronic access control solutions force a tradeoff. Standalone keypads are cheap but produce no audit trail. Hardwired access control gives you everything but demands conduit, power supplies, and an electrical contractor before a single door goes live. The LE Series sits in neither category. Battery powered and wirelessly managed, it delivers enterprise-grade access control- real-time credential management, cloud-based audit logs, PACS integration, mobile access, and automatic scheduled updates- while installing in existing mortise preps with minor modifications in 30 minutes or less.

The lock, credential reader, door position sensor, and request-to-exit switch are all integrated into one assembly. No separate components to mount, align, wire, or commission. One unit, one prep, one installation. That simplicity is what makes the LE Series the standard specification for interior door electronic access control in healthcare, education, commercial real estate, and multifamily.

Schlage LE Series Models and Functions

LEMS- Mortise with LED Indicator

The LEMS is the indicator version, used for storeroom and office functions where visual lock status on the outside is required. The LED communicates credential acceptance or rejection and lock state at a glance. Correct specification for server rooms, medication storage, records areas, and staff-only openings.

LEMB- Mortise with Interior Push Button

The LEMB includes an interior push button that allows the occupant to lock the outside credential reader from inside without presenting a credential. Used for office, conference room, and privacy functions. When someone inside needs to work undisturbed or secure the room temporarily, the push button provides that control instantly.

LEMD- Mortise with Deadbolt

The LEMD adds a mechanical deadbolt for apartment and high-security applications. Resident units in multifamily, assisted living rooms, and any opening where a deadbolt provides an additional mechanical security layer alongside electronic credential control. The door position switch on MD applications requires additional prep beyond standard mortise modifications.

LEB- Bluetooth and NFC Mobile Enabled Upgrade

The LEB designation adds Bluetooth Low Energy (BLE) and NFC mobile credential reading. Apple Wallet student and employee IDs, Android NFC mobile credentials, and Schlage Mobile Access Credentials all read on the LEB without any hardware change. Facilities can upgrade existing LE locks to LEB with retrofit upgrade kits- the transition to mobile-first access control doesn't require replacing the hardware already on the door.

ENGAGE Technology: Bluetooth, WiFi, and Cloud Management

ENGAGE is Schlage's cloud-based access control platform. Every LE Series lock has two built-in wireless radios- Bluetooth and WiFi- and both connect to ENGAGE.

Bluetooth handles direct lock configuration from a smartphone or tablet without any proprietary handheld device. The free ENGAGE app on iOS and Android connects to the lock directly, letting you add users, set schedules (in 30-minute increments), configure holiday time zones, enable auto-lock and auto-unlock times, and pull audit logs from anywhere. iOS 7.1 or later and Android 4.4 or later are supported. This alone handles the majority of standalone installations without any additional infrastructure.

WiFi enables automatic daily updates pushed from host software directly to the lock over the building's existing network. No site visit required. Access changes, new credentials, schedule modifications- all delivered automatically once per 24-hour cycle. For real-time access control, the ENGAGE Gateway provides networked live communication, enabling instant lockdown, immediate credential revocation, and real-time event monitoring.

Over 40 PACS providers have integrated with the LE Series through Schlage's PACS Alliance program. That coverage includes every major enterprise access control platform used in healthcare, government, and higher education. The LE's open architecture means it can start as a standalone offline lock and integrate into a full PACS deployment later with the same hardware- no swap, no capital re-expenditure.

Credential Compatibility Across the Schlage LE Series

The LE Series supports more credential types than any competing wireless mortise lock at its price point. Proximity at 125 kHz covers the largest installed base of access control credentials in commercial buildings today. Smart card at 13.56 MHz- Schlage MIFARE- delivers stronger encryption and is the credential format driving most enterprise credential migrations. Bluetooth Low Energy and NFC mobile credentials via the ENGAGE app or Apple Wallet are where student IDs, employee badges, and resident access are all moving.

For facilities already running HID infrastructure, the Si option adds iCLASS, iCLASS SE, and Seos smart and NFC mobile credential support. The same lock that handles your existing proximity population today reads HID smart cards and NFC mobile credentials without any hardware replacement at the door. Note: proximity bit lengths greater than 37 are not supported.

No-Tour mode allows Schlage MIFARE smart credentials (1K Byte) to push access control updates to locks as users badge in throughout the day- no WiFi required at the door, no scheduled site visit, no technician coordination. The credential itself carries the update.

Installation, Key Override, and Mechanical Specifications

The LE Series installs in existing L Series mechanical mortise preps with minor modifications and no wiring to the door. Door thickness range is 1-3/4 inch standard, with 1-3/4 to 2-1/4 inch optional (SFIC limited to 2-inch maximum). Standard strike is ANSI 1-1/4 inch by 4-7/8 inch curved lip with dust box and integrated door position switch- no separate DPS prep required. Key override is a 6-pin Everest 29 S123 keyway mortise cylinder with two patented keys, standard. Conventional and interchangeable cores, master keying, grand master keying, and competitor cylinder compatibility are all available. Battery life is up to 2 years on 4 AA batteries included with the unit. The LE suites with 31 L Series lever designs and 2 knob designs across all finishes, keeping hardware schedules visually consistent across mechanical and electronic openings throughout a building.

Certifications: ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, ULC S319, UL 10C 3-hour fire rated, FCC Part 15, ADA compliant, RoHS.

Schlage LE Series Applications

Commercial real estate and office buildings: Suite entries, conference rooms, and common area doors with existing mortise preps convert to electronic access without construction. Tenant rekey costs disappear entirely- credential deactivation from the ENGAGE app replaces the locksmith call.

K-12 and higher education: Campus proximity card systems extend to interior doors without infrastructure replacement. Apple Wallet and NFC mobile credentials serve student populations shifting away from physical IDs.

Healthcare and assisted living: Medication rooms, records storage, and staff-only areas get audit-trail access control without wiring projects. The integrated door position sensor monitors propped doors- a compliance requirement in many healthcare environments.

Multifamily residential: The LEMD deadbolt version provides apartment-function access for resident units with mobile credentials eliminating physical key management for both residents and property managers.

Frequently Asked Questions About the Schlage LE Series

Q: What is the Schlage LE Series?

 It's Schlage's wireless mortise lock line with built-in Bluetooth and WiFi. It brings electronic access control to interior and perimeter doors without running wires, built on the Grade 1 L Series mechanical chassis.

Q: Does the Schlage LE Series require wiring? 

No. LE locks run on 4 AA batteries. They install in existing mortise preps with no wires to the door and only minor modifications.

Q: How long does installation take? 

About 30 minutes or less for most openings. The lock, credential reader, door position sensor, and request-to-exit switch all arrive as one integrated unit.

Q: What is ENGAGE technology? 

Schlage's cloud platform for wireless lock management. The free ENGAGE app on iOS and Android lets you add users, set schedules, and pull audit logs remotely over Bluetooth or WiFi.

Q: What credentials work with the Schlage LE Series?

• Proximity cards at 125 kHz

• Smart cards at 13.56 MHz (Schlage MIFARE)

• Bluetooth and NFC mobile credentials

• Apple Wallet IDs (LEB models)

• HID iCLASS, iCLASS SE, and Seos (Si option)

Q: What is the battery life?

 Up to 2 years on 4 AA batteries under normal use. A low-battery alert activates before the batteries reach a critical level.