Accentra (Yale) TJ51 Door Closer, Top Jamb w/2-3/4" to 7" Reveals, Non-Hold Open, Size 1-6

Provides the best alternative to the regular arm applicationMust be sufficient frame face and/or ceiling clearance for this applicationRequires a top rail on the door of just 2-1/8" (54mm)Provides the best door control for doors in exterior walls that swing out of a building

Features:

Exceeds 25 million cycles based on internal cycle testing

Adjustable 1-6 spring makes installation selection easier

Non-handed for installation on right- or left-hand swing door

Tri-packed (regular arm, top jamb and parallel arm installations)

Rack-and-pinion design - Cast aluminum body - 1-3/8" (35mm) diameter piston  5/8" (16mm) diameter pinion journals

Standard, separate and independent, latch, sweep and backcheck intensity valves

2-7/8" (73mm) projection

All standard arm applications allow doors to swing 180 Degree, conditions permitting

15-year limited warranty

Staked valves

Reliable: High strength aluminum alloy closer body provides for long life; independent latch, sweep and backcheck intensity valves ensure positive control

Sweep Speed Control Valve Allows adjustment of door’s speed from the door's full open position down to approximately 10 Degree from the closed position.

Latch Speed Control Value Allows adjustment of door speed from approximately 10 Degree down to the door’s fully closed position.

Adjustable Backcheck Cushion Valve Provides control of the door in the opening cycle, beginning at approximately 75 Degree of door opening. It slows/ cushions the door opening, when the door is forcibly opened beyond its pre-adjusted opening speed limits.

Closer Fluid All door closers are supplied with a temperature stable, multi-viscosity fluid. This fluid will permit the door closer to perform within a wide temperature range: from very high to as low as -40 Degree F.

Door Closer Power Options Series 51 Multi-Sized Door Closer Fully adjustable through the power range of sizes 1 through 6, as outlined in ANSI/BHMA specification A156.4. Also, complies with the opening force requirements as outlined in the Americans with Disabilities Act (A.D.A.) and ANSI A117.1 for interior doors.

Model:Accentra (Yale) 51, 51689, 51690

Compliance standards The series 51 door closers are designed to comply with requirements of the Americans with Disabilities Act (A.D.A.) and ANSI standard A117.1.

All series 51 are ANSI/BHMA A156.4, Grade 1 certified. All Yale® series 51 closers with non-hold open arms are listed by Underwriters’ Laboratories for labeled fire doors. This includes compliance to UL10C for 3-hour assemblies.

These products are manufactured in a certified ISO 9001 facility. CAUTION: Door Closers for Low Opening Force Applications: Door closers installed in opening required to meet the requirements of The American with Disabilities Act or ANSI standard A117.1, when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door.

Related Categories

• Accentra Door Closers