usa Trusted Since 2001

Free Shipping On All Orders $300 And Up

Same Day Shipping

Expedited delivery available

Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

600S-
1-Page5-AC-MAGNETIC
600S-
1-Page5-AC-MAGNETIC
naxt
prev

Product Details

Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

Product Features:

Instant release, no hysteresis

Non-aluminum parts are plated to resist corrosion

Built-in arc suppression

Can be used with any access control system

E-Z mount system, no special tools required

Self drilling TEC screws

Clear anodized Aluminum, (US28) finish

Limited lifetime warranty

Specifications:

600 lbs holding force

Magnet size: 9-7/8" L x 1-11/16" H x 1" W

Armature size: 7-1/4" L x 1-7/16" H x 5/8" W

Operates on 12 or 24 VDC, switch selectable

Low current draw: 400 mA at 12 VDC, 200 mA at 24 VDC

Operating Temperature: +14 to +131F [-10 to +55C]

UL and Canadian UL listed, R16759

Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

SKU: 600S

In Stock

$161.76

About this item

The Alarm Controls 600S is a single-door electromagnetic lock (maglock) rated at 600 lbs of holding force. A maglock secures a door with magnetism rather than a bolt: an electromagnet mounts on the frame, an armature plate mounts on the door, and when the magnet is energized it holds the door shut with the full 600 lbs of force. Cut power and the door releases instantly, which is what makes a maglock the standard choice for access-controlled and fail-safe openings. The 600S works with any access control system, installs without special tools, and is UL and Canadian UL listed under R16759.

 

How the 600S works on an access control door

 

This is the core of why you'd specify a maglock. The 600S holds the door locked only while it has power, so it ties directly into a card reader, keypad, request-to-exit device, or fire alarm. Present a valid credential (or trigger the exit button or fire system) and power drops for an instant, releasing the door, then it re-energizes and holds again when the door closes. Because it releases the moment power is cut, the 600S is inherently fail-safe, which is exactly what egress codes require on many doors: lose power and people can always get out.

The 600S features instant release with no hysteresis, meaning it lets go cleanly and immediately with no residual magnetism dragging the release. That matters for reliable, fast egress. It also has built-in arc suppression to protect the circuit and connected electronics from voltage spikes when the magnet de-energizes.

 

Built for easy install and reliable service

 

The 600S is designed to go in fast. The ACC E-Z mount system installs without special tools, using the included self-drilling TEC screws, and the lock works on 12 or 24 VDC, switch selectable, so it matches whatever your access control power supply provides. Current draw is low at 400 mA on 12 VDC or 200 mA on 24 VDC, which keeps power supply sizing simple. Non-aluminum parts are plated to resist corrosion, the body is clear anodized aluminum (US28), and it carries a limited lifetime warranty. The operating temperature range runs +14 to +131F, suitable for typical interior and protected applications.

 

Alarm Controls 600S specifications

 

  • Type: Electromagnetic lock (maglock), single door. Fail-safe.

  • Holding force: 600 lbs.

  • Magnet size: 9-7/8 inch L x 1-11/16 inch H x 1 inch W.

  • Armature size: 7-1/4 inch L x 1-7/16 inch H x 5/8 inch W.

  • Voltage: 12 or 24 VDC, switch selectable.

  • Current draw: 400 mA at 12 VDC, 200 mA at 24 VDC.

  • Release: Instant, no hysteresis. Built-in arc suppression.

  • Mounting: ACC E-Z mount, no special tools, self-drilling TEC screws included.

  • Finish: Clear anodized aluminum (US28).

  • Operating temperature: +14 to +131F (-10 to +55C).

  • Listings: UL and Canadian UL listed, R16759.

  • Compatibility: Works with any access control system.

  • Warranty: Limited lifetime.

 

Why choose the Alarm Controls 600S

 

Alarm Controls builds dependable, value-priced access control hardware, and the 600S is its workhorse single-door maglock. You get 600 lbs of holding force, clean instant release for reliable egress, built-in arc suppression, low current draw, and the E-Z mount system that gets it installed quickly. It drops into any access control setup, ties into card readers, keypads, exit buttons, and fire alarm release, and the limited lifetime warranty backs it for the long haul. For a standard interior access-controlled door, it's a proven, code-friendly choice.

One thing to confirm before ordering: the 600S is for a single door in an out-swing application with the armature mounted to the door. In-swing doors typically need a Z-bracket, and Alarm Controls offer matching brackets, spacers, and the DJ-1 install template in the same line. If you have a double door, the 600D and 600DLB cover pairs.

 

Order the Alarm Controls 600S from American Locksets

 

We stock the full Alarm Controls maglock line from authorized distribution, so every lock ships with the manufacturer warranty. Compare models and accessories in the Alarm Controls maglocks category, or browse all magnetic locks.



Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

Product Features:

Instant release, no hysteresis

Non-aluminum parts are plated to resist corrosion

Built-in arc suppression

Can be used with any access control system

E-Z mount system, no special tools required

Self drilling TEC screws

Clear anodized Aluminum, (US28) finish

Limited lifetime warranty

Specifications:

600 lbs holding force

Magnet size: 9-7/8" L x 1-11/16" H x 1" W

Armature size: 7-1/4" L x 1-7/16" H x 5/8" W

Operates on 12 or 24 VDC, switch selectable

Low current draw: 400 mA at 12 VDC, 200 mA at 24 VDC

Operating Temperature: +14 to +131F [-10 to +55C]

UL and Canadian UL listed, R16759

600S-
Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

Product code: 600S

In Stock

$161.76

$161.76

600S-
Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

Product code: 600S

In Stock

$161.76

$161.76

Alarm Controls 600S Electromagnetic Lock - For Single Door - 600 lbs Holding Force

SKU: 600S

Related Brands

The Alarm Controls 600S is a single-door electromagnetic lock (maglock) rated at 600 lbs of holding force. A maglock secures a door with magnetism rather than a

The Alarm Controls 600S is a single-door electromagnetic lock (maglock) rated at 600 lbs of holding force. A maglock secures a door with magnetism rather than a