LCN 4642 Auto Equalizer Power Operator - Top jamb (push side) mounted
Electric Closer: 120V
Finish: Aluminum or Dark Bronze
The 4600 Series electric Auto-Equalizerseries combines all door operator and
door control functions in one package. This versatile, easy-to-install system is low
maintenance and offers the following features:
- Allows 90 Degree of power opening & Manual opening up to 100 Degree
- Easy access to on / off and hold open switches.
- Quiet, reliable operator delivers consistent performance.
- No expensive service contracts or periodic maintenance required.
- Fail safe operator acts as a standard door closer in event of power outage.
- Low energy operator does not require guard rails or safety mats.
- Advanced, easy-to-install controller module allows independent adjustment of:
Door Opening Speed Delay / Trigger Time for Sequential Option Door Opening Force Electric Strike Delay Time Hold Open Time 90 Degree Slow Down Alternate Action Timeout Safety Scanner Lockout Time
- Meets ADA requirements (power mode)
- Non-sized cylinders for interior doors to 4'6" and exterior doors to 3'6". Non-Sized 4640 series cylinder is adjustable from size 2 through size 5 and is shipped set to size 3. Closing power of 4640 Series closers may be increased 50%.
- Non-handed for either right or left swinging door.
- The 4642 is designed for push side installation on the top jamb for both standard and flush ceiling conditions. It requires a minimum door width of 36" and a 1 3/4" min. head frame. To p rail of door must be at least 1 3/4" and butt hinge size should not exceed 5". The 4642 accommodates reveals up to 4 1/2". For reveal depths of 4 1/2" - 8", requires 4642 L (Long Arm). For reveal depths greater than 8" - consult factory. Maximum door weight is 225 lbs.
Electrical Data & Certifications: See next Tab