Apple and Android Compatible - iPhone 4S or above with iOS 8.0 and above.
Android 4.3 or above with Bluetooth Low Energy capability.
Gateway Connectivity - optional gateway device to connect compatible locks to
the internet, so users can manage locks remotely.
Bluetooth Connectivity - lock can be managed / synced using the K3 (Apple)
and K3 (Android phones without NFC), and K3+ (Android phones with NFC) app.
NFC (Near Field Communication) Interface - NFC compatible
for android phones. For the complete list of phones, please go to link:
www.nfcworld.com/nfc-phones-list/#available
Admin Phone - a lock can only have one Administrator phone at a time. Only
smartphones are used as Administrator. One admin phone can manage up to
250 deadbolts.
Access Log (Audit Trail) - the K3 app features a 24 / 7 activity log, so you can
keep track of who accessed the lock. A timestamped access log can be shared by
the Admin phone via email. 10,000 audit trail entries.
Smart L / R Handing Learning - DB9000 can be installed on a left handed or
right handed door. The deadbolt can automatically learn the handing of the door
when this feature is set up.
Key / Thumb-turn Turning Detector - when operating DB9000 mechanically
(key override) or manually (turning the thumb-turn from the inside), the deadbolt
detects it and the event will be registered in the access log.
Door Jam Protector - if the bolt fails to retract or project, due to any obstacles
(e.g. door frame is not aligned with the door), the deadbolt will detect it and
will stop turning the motor after a few tries. This feature is to prevent it from
over-heating which could cause permanent damage to the circuit boards.
Optional Auto Re-locking - Admin has the option to set time for deadbolt to
automatically re-lock, from 10-250 seconds.
Passage Mode - disable auto re-locking feature for passage mode.
Tones and LED Indicators - indicates the operating status of the lock
accompanied by the corresponding tones / beeps.
Restricted Access Right - DB9000 can be programmed to specify the access
period or intervals of users.
Keypad Anti-Tamper Lockout - if an invalid code is entered 3 times
consecutively, the unit will alarm 10 beeps and stay idle for 1 minute.
Remote Switch / Release - DB9000 provides 2 remote switches.
Either can be used for an emergency push button switch, or can be connected to
alarm systems IE fire alarms.
RFID Card (Standard) - compatible with existing MIFARE
infrastructure. Operates at 13.56 MHz in accordance with
ISO 14443A. Inductive distance up to 1 3
/16?.
RFID KEY FOB (Optional) - compatible with existing MIFARE infrastructure.
Operates at 13.56 MHz in accordance with ISO 14443A. Inductive distance up
to 1 3
/16?.
Weather Resistant - the DB9000 is designed to ensure that the
internal electronic parts are protected from moisture, dust, water and
corrosion. All models are weather resistant with operating temperature
of +149?F to -4?F (+65?C to -20?C) and storage temperature
of +176?F to -22?F (+80?C to -30?C).
Low Battery Warning - when voltage is lower than safety power, DB9000 gives
beep sound warning after unlocking the device.
Clutch Technology - the outside lever of the DB9000 is a free-wheeling lever.
If no valid code is entered, the lever will just turn freely without moving any parts
inside. Thus preventing breaking or tampering.