LCN 4642 Auto Equalizer Power Operator - Push Side Mount

LCN 4642 Auto Equalizer Power Operator - Top jamb (push side) mounted

*Electric Closer:120V*

Finish:Aluminum or Dark Bronze

The 4600 Series electric Auto-Equalizerseries combines all door operator and door control functions in one package. This versatile, easy-to-install system is low maintenance and offers the following features:

Allows 90 Degree of power opening & Manual opening up to 100 DegreeEasy access to on / off and hold open switches.Quiet, reliable operator delivers consistent performance.No expensive service contracts or periodic maintenance required.Fail safe operator acts as a standard door closer in event of power outage.Low energy operator does not require guard rails or safety mats.Advanced, easy-to-install controller module allows independent adjustment of:Door Opening Speed Delay / Trigger Time for Sequential Option Door Opening Force Electric Strike Delay Time Hold Open Time 90 Degree Slow Down Alternate Action Timeout Safety Scanner Lockout TimeMeets ADA requirements (power mode)Non-sized cylinders for interior doors to 4'6" and exterior doors to 3'6". Non-Sized 4640 series cylinder is adjustable from size 2 through size 5 and is shipped set to size 3. Closing power of 4640 Series closers may be increased 50%.Non-handed for either right or left swinging door.The 4642 is designed for push side installation on the top jamb for both standard and flush ceiling conditions. It requires a minimum door width of 36" and a 1 3/4" min. head frame. To p rail of door must be at least 1 3/4" and butt hinge size should not exceed 5". The 4642 accommodates reveals up to 4 1/2". For reveal depths of 4 1/2"8", requires 4642 L (Long Arm). For reveal depths greater than 8"consult factory. Maximum door weight is 225 lbs.

Electrical Data & Certifications:See next Tab

Electrical Data

The 4600 series can accommodate both surface and concealed wiring applications. It requires 120VAC supplied to the operator. Maximum AC current load is 1 amp. A built-in 12VDC & 24VDC power supply (rated for 1 amp combined current load) can power peripheral actuators, electronic strikes or mag-lock devices. The 4600 series is compatible with all LCN 8300 series actuators and scanners. High-security card readers or keypads may also be used as actuators. The 4600 series will accept inputs from a wide variety of security systems, allowing security personnel to regulate accessability. A 4600 will accept a fire alarm input to deactivate unit when fire alarm is triggered. A circuit breaker and resettable fuses protect high-voltage inputs and low-voltage output circuits, respectively. To ensure proper electrical functions, installation should be made when temperature is between 35 F up to 120 F

Certifications

4640 Series is UL and cUL listed with standard arm for self-closing doors and meets the provisions of ANSI Standards A117.1, A156.19, and the Americans with Disabilities Act.

Related Categories

• Power Operator